RC Motor Speed Controller 12 AMP Brushless ESC For RC Remote Control Airplane 12A manufacturer from China Shenzhen Junwangda Hardware Products Co., Ltd.

RC Motor Speed Controller 12 AMP Brushless ESC For RC Remote Control Airplane

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: 12A

BULL RUNNING fixed wing 12A brushless ESC with BEC for airplane brushless electronic speed controller esc
<img alt="" sr

BULL RUNNING fixed wing 12A brushless ESC with BEC for airplane brushless electronic speed controller esc

Specifications:

1.Output: Continuous 10A, Burst 12A up to 10 seconds.
2.Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NiMh battery.
3.BEC: 1A / 5V Linear mode BEC.
4.Refresh rate of the throttle signal: 50Hz to 432Hz.
5.Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
6.Size: 38mm*18mm*6mm.
7.eight: 9.4g.

Used for: EP (Electric Powered) 300 class fixed-wing airplane sports.

ESC Software: BIHELI
Use with sensor & sensorless brushless motor
With English Manual

Function:

	Tones	“Toot-”	“Toot-toot-"	“toot-	“toot-
				toot-	toot-
				toot-”	toot-
					toot-”
Items		1Short	2 Short	3 Short	4 Short
Brake		Off	On
Battery Type		NiMH/NiCd	Li-ion/NiCd
Cutoff Mode		Reduce	Cut-off
Cutoff Threshold		Low	Medium	High
Motor Timing		Low	Medium	High
Startup Acceleration		Very Soft	Soft	Acce
Governor Mode		RPM Off	RPM On
Motor Rotation		Forward	Reverse
Default Setting		Restore

About us:

1. we have simonk and blheli,we have owned software to hape you change the parameter.
2. 2 we can do OEM for many conpany.

All firmware and components are purchased from renowned makers.
Multiple motor timing choices, so compatible with most brushless motor in the market.
Compatible with fixed-wing and helicopter.
If the position of the throttle stick is inadequate when power on, the motor will not start and emit “ Beep-beep-“ continuous warnings.
Multiple protection features: Over-heat protection and throttle signal loss protection, low voltage cut-off protection.
Throttle range setting and multiple accelerations start up choices. Wires Connection (Connectors should be soldered carefully to the cables and insulated with heat shrink tube to avoid shortcut)

Wires Connection
(Connectors should be soldered carefully to the cables and insulated with heat shrink tube to avoid shortcut)